Search Products



HVAC Instrumentation Valves at a glance...

We can provide a variety of the following: Gauge / Pet cocks, ball valves, 3-way inspection cocks, no loss connectors, pressure snubbers, binder test points, check valves, globe valves, gate valves, safety relief valves, commissioning valves and strainers. These are available in a wide variety of materials and sizes are available often from stock and are ideally suited for HVAC and plant room applications. As a general rule our HVAC range of products are designed for use indoors unless specifically noted otherwise.

 PRODUCT IMAGE PRODUCT DESCRIPTION

Brass Gauge Cock Brass Gauge Cock

Brass Gauge Cocks are an ideal cost effective method of isolating HVAC pressure gauges or pressure gauges with brass wetted parts often found on water or general utility applications to enable them to be removed from the system for inspection or... VIEW MORE

Ball Valve Stainless Steel - One Piece Ball Valve Stainless Steel - One Piece

The Ashford Instrumentation range of One Piece Ball Valves feature a reduced bore and  internal sealing face. Our lever handle operated ball valves offer an ideal lower cost solution for isolating pressure gauges where the  process tem... VIEW MORE

3-Way Brass Ball Valve 3-Way Brass Ball Valve

The Ashford Instrumentation 3-Way Brass Ball Valve is available as a two way (Model AIART70) or three way (AIART71) design. The two way design will always mean that one port is permanently closed and flow directly across the valve is not possibl... VIEW MORE

3-Way Stainless Steel Ball Valve 3-Way Stainless Steel Ball Valve

The Ashford Instrumentation 3-Way Stainless Steel Ball Valve is available as a two way L-Port or three way T-Port design. The two way L-Port design will always mean that one port is permanently closed and flow directly across the valve is not po... VIEW MORE

Self-Seal No-Loss Connector Self-Seal No-Loss Connector

The brass No-Loss Connector, also know as a Check Valve is designed for use on Fire Sprinkler Systems to safely enable a pressure gauge to be removed without the need to manually isolate. The self-seal design has the process thread coated with Loctit... VIEW MORE

Snubber Snubber

The Ashford Instrumentation range of Pressure Gauge Snubbers are used to dampen and improve pressure gauge readings by suppressing the effects of pulsation and pressure peaks in the pressure line.The body is machined from 316 stainless steel bar stoc... VIEW MORE

Binder Style Test Plugs - Brass Body Binder Style Test Plugs - Brass Body

Binder style brass test plug with screw connection and rubber self-sealinginsert. Predominantly used on pipework installations allowing easy tappingpoints when testing, maintaining & commissioning HVAC installations.The test points... VIEW MORE

Binder Style Test Plugs - Stainless Steel Body Binder Style Test Plugs - Stainless Steel Body

abc123p align="left"abc456abc123font face="Arial" size="2"abc456Binder style test plug stainless steel body, screw connection binder style test points with rubber self-sealing insert used when testing & commissioning HVAC installations. The test... VIEW MORE

Safety Relief Valve - Air & Inert Gases Safety Relief Valve - Air & Inert Gases

Text awaiting to be updated...... VIEW MORE

Female/Female Bar Stock Needle Valve - EL Series Female/Female Bar Stock Needle Valve - EL Series

Ashford Instrumentation EL Series AINV-04 Female/Female Bar Stock Needle Valve is machined from 316 stainless steel bar stock and can be manufactured with PTFE packing as standard with the option for Grafoil if required. . The AINV-04 Needle Val... VIEW MORE

Bar Stock Block & Bleed Needle Valve - EL Series Bar Stock Block & Bleed Needle Valve - EL Series

Ashford Instrumentation EL Series AINV-05 Bar Stock Needle Valve is available in Male/Female, Female/Female and Male/Male configurations. Machined from 316 stainless steel bar stock as standard (see options below) the valve is produced with with PTFE... VIEW MORE